Erase Hard Drive Cannot Reinstall Mac Os


If OS X El Capitan came preinstalled on your new Mac, you’ll probably never need this article until you decide to sell it. At that time, it’s a good idea to erase the disk and install a fresh copy of OS X for the next owner.

  1. Erase Disk And Reinstall Mac Os

If you’re thinking about reinstalling because something has gone wrong with your Mac, know that an OS X reinstallation should be your last resort. If nothing else fixes your Mac, reinstalling OS X could well be your final option before invasive surgery (that is, trundling your Mac to a repair shop). You don’t want to reinstall OS X if something easier can correct the problem. So if you have to do a reinstallation, realize that this is more or less your last hope (this side of the dreaded screwdriver, anyway).

Obviously, I did not have turned on the ability to boot from an external hard drive, as MacBooks with the T2 chip have this disabled by default. So, this morning I’m off to the local Apple Store to get my Mac unlocked. My suggestion? Before attempting to reinstall the system, make sure to enable the ability to boot from external drives. Step 3: Erase the Mac Hard Disk This is an optional step during the reinstall macOS process as a lot of people would like to delete the existing data on their system. If you are reselling your Mac or your system has been infected by a malware, then you can consider this option as well. Jul 02, 2020  How to erase your disk. Start up from macOS Recovery. Then select Disk Utility from the Utilities window and click Continue. If you're not erasing the disk your Mac. Choose View Show All Devices from the menu bar in Disk Utility. The sidebar now shows your.

In this article, you discover all you need to know to install or reinstall OS X, if you should have to.Reinstalling is a hassle because although you won’t lose the contents of your Home folder, applications you’ve installed, or the stuff in your Documents folder (unless something goes horribly wrong or you have to reformat your hard drive), you might lose the settings for some System Preferences, which means you’ll have to manually reconfigure those panes after you reinstall.

And you might have to reinstall drivers for third-party hardware such as mice, keyboards, printers, tablets, and the like. Finally, you might have to reregister or reinstall some of your software.

It’s not the end of the world, but it’s almost always inconvenient. That said, reinstalling OS X almost always corrects all but the most horrifying and malignant of problems. The process in El Capitan is (compared with root-canal work, income taxes, or previous versions of OS X) relatively painless.

How to install (or reinstall) OS X

In theory, you should have to install El Capitan only once, or never if your Mac came with El Capitan preinstalled. And in a perfect world, that would be the case. But you might find occasion to install, reinstall, or use it to upgrade, such as

  • If your Mac is currently running any version of OS X except El Capitan

  • If you have a catastrophic hard-drive crash that requires you to initialize (format) or replace your boot drive

  • If you buy an external hard drive and want it to be capable of being your Mac’s startup disk (that is, a bootable disk)

  • If you replace your internal hard drive with a larger, faster, or solid state drive

  • If any essential OS X files become damaged or corrupted or are deleted or renamed

  • If you sell or give away your Mac

The following instructions do triple duty: Of course they’re what you do to install OS X for the first time on a Mac or a freshly formatted hard or solid-state disk. But they’re also what you do if something really bad happens to the copy of OS X that you boot your Mac from, or if the version of OS X on your Mac is earlier than 10.10 El Capitan. In other words, these instructions describe the process for installing, reinstalling, or upgrading OS X El Capitan.

You must have Internet access to complete this procedure.


If you’ve never had El Capitan on this Mac, the first thing to do is visit the Mac App Store, download El Capitan (it’s free), and install it. Once you’ve done that, here’s how to install, reinstall, or upgrade to El Capitan, step by step:

  1. Boot from your Recovery HD partition by restarting your Mac while holding down the Command+R keys.

    The OS X Utilities window appears.

  2. Select Reinstall OS X, and click Continue.

    The OS X El Capitan splash screen appears.

  3. Click Continue.

    A sheet informing you that your computer’s eligibility needs to be verified by Apple appears.

  4. Click Continue to begin the process of installing or reinstalling OS X.

    If you’re not connected to the Internet, you’ll be asked to choose a Wi-Fi network from the AirPort menu in the top-right corner.

    The El Capitan software license agreement screen appears.

  5. Read the license agreement and click Agree.

    A sheet drops down, asking whether you agree to the terms of the license agreement.

  6. Click Agree again.

    Yes, you did just click Agree; this time you’re being asked to confirm that you indeed clicked the Agree button. If you don’t click Agree, you can’t go any farther, so I advise you to click Agree now.

  7. Choose the disk on which you want to reinstall OS X by clicking its icon once in the pane where you select a disk.

    If only one suitable disk is available, you won’t have to choose; it will be selected for you automatically.

  8. Click the Install button.

    A sheet asks for your Apple ID and password.

  9. Type your Apple ID and password in the appropriate fields, and click Sign In.

    Your El Capitan installation (or reinstallation) begins. The operating system takes 30 to 60 minutes to install, so now might be a good time to take a coffee break. When the install is finished, your Mac restarts itself.

If you were reinstalling El Capitan on the hard disk that it was originally installed on, or upgrading from Mavericks, you’re done now. Your Mac will reboot, and in a few moments you can begin using your new, freshly installed (and ideally trouble-free) copy of OS X El Capitan.

If, on the other hand, you’re installing El Capitan on a hard disk for the first time, you still have one last step to complete. After your Mac reboots, the Setup Assistant window appears.

Getting set up with the Setup Assistant

Assuming that your installation process goes well and your Mac restarts itself, the next thing you should see (and hear) is a short, colorful movie that ends by transforming into the first Setup Assistant screen (Apple Assistants such as this are like wizards in Windows, only smarter), fetchingly named Welcome.

To tiptoe through the Setup Assistant, follow these steps:

  1. When the Welcome screen appears, choose your country from the list by clicking it once, and then click the Continue button.

    If your country doesn’t appear in the list, select the Show All check box, which causes a bunch of additional countries to appear.

    After you click Continue, the Select Your Keyboard screen appears.

  2. Choose a keyboard layout from the list by clicking it once, and then click Continue.

    If you want to use a U.S. keyboard setup, click the U.S. listing. If you prefer a different country’s keyboard layout, select the Show All check box; a bunch of additional countries’ keyboards (as well as a pair of Dvorak keyboard layouts) appear in the list. Choose the one you prefer by clicking it — and then click Continue.

    The Select Your Wi-Fi Network screen appears.

  3. Click the name of the wireless network you use to connect to the Internet, type its password, and then click Continue.

    If you don’t see the network you want to use, click Rescan.

    If you don’t use a wireless network, click Other Network Setup, and then choose one of the available options, or choose My Computer Does Not Connect to the Internet. Click Continue.

    The Migration Assistant (also known as the Transfer Information to This Mac) screen appears.

    But I am still getting the error message on client-side.The license log is as follows: 200420:31:22Reason=Fatal error200420:31:22ComputerName=VAULTOFFICE200420:31:22OS=6.1.7601.Service Pack 1200420:31:22File=AdlmIntNWFBLicense.cpp,Line=0/02/0112:31:22VendorID=3 FLEXLM-NW200420:31:22VendorError=-8 Invalid (inconsistent) license key.200420:31:22FLEXLM-NW=v11.12.1.4 build 154914 x64n6200420:31:22Reason=Fatal error200420:31:22ComputerName=VAULTOFFICE200420:31:22OS=6.1.7601.Service Pack 1200420:31:22File=AdlmIntNWFBLicense.cpp,Line=0/02/0112:31:22AdlmIntError=20 License check out failed. Failed to acquire information on the driver and software mac. I have deleted the old service on FlexLM and configured a new service with a new licence.

  4. Do one of the following:

    • Choose to transfer data, and then click Continue.

      If this is a brand-new Mac or you’re installing OS X El Capitan on a Mac and have another Mac or Time Machine backup disk nearby, you can transfer all of your important files and settings by following the onscreen instructions and connecting the new and old Macs via FireWire or Ethernet cable.

      Transferring data can take hours — that’s the bad news.

      The good news is that once the data transfer finishes, you’re finished, too. In other words, you can ignore the steps that follow (which are only for brand new installations with no data to transfer).

      Goodbye and good luck.

    • Choose not to transfer data, and then click Continue.

      The Enable Location Services screen appears. Location Services allows apps such as Maps and services such as Spotlight Suggestions to gather and use data including your approximate location.

  5. Select (or don’t select) the Enable Location Services on this Mac check box, and then click Continue.

    The Sign In with Your Apple ID screen appears.

  6. Do one of the following:

    • If you want to use your Apple ID with this Mac, type your ID (such as [email protected]) and password in the appropriate fields, and then click Continue.

    • If you don’t have an Apple ID or prefer not to use one with this Mac, click Don’t Sign In, and then click Continue.

      To learn more about getting an Apple ID, click the blue Learn More link. In a nutshell, an Apple ID lets you make one-click purchases at the iTunes Store, iPhoto, or the Apple Store, and includes free iCloud membership.

    The Terms and Conditions screen appears.

  7. Read the Terms and Conditions and click Agree.

    A sheet drops down to confirm your agreement.

  8. Click Agree again.

    The Create a Computer Account screen appears.

  9. Do one of the following:

    • If you provided your Apple ID (in Step 6), select the Use My iCloud Account to Log In check box. Then fill in the Account Name (sometimes called Short Name).

    • Fill in the Full Name, Account Name (sometimes called Short Name), Password, Verify Password, and Hint fields.

    This first account that you create will automatically have administrator privileges for this Mac. You can’t easily delete or change the name you choose for this account, so think it through.

    You can’t click the Continue button until you’ve filled in the first two fields. Because a password is optional, you can choose to leave both password fields blank if you like. If you do, your Mac warns you that without a password, your Mac won’t be secure. If that’s okay, click OK. If you change your mind and want to have a password, click Cancel.

  10. If you want a different picture, click the little picture to the right of your name (labeled “edit”) and do one of the following:

    • To take a picture of yourself with your Mac’s built-in camera, click the Take Photo Snapshot button. Then click Continue.

      When the picture appears, you can change its size by using the slider control directly below the image and move it around in the frame by clicking your face and dragging. If you’re not happy with this snapshot, click Retake a Video Snapshot.

    • To select a picture from the Picture library, click the picture you want to represent you — the butterfly, dog, parrot, flower, or whatever — and then click Continue.

  11. Click Continue to exit the Create a Computer Account screen. If you didn’t provide an Apple ID, skip to Step 13.

    If you provided your Apple ID in Step 6, the Set Up iCloud Keychain screen appears.

  12. Do one of the following:

    • Click Set Up iCloud Keychain. When the screen requesting your passcode appears, type your four-digit passcode, and click Continue.

      If you’ve forgotten your passcode or don’t have one, click Forgot Code to Reset iCloud Keychain.

      A verification code is sent to your iPhone or other Apple device.

    • Click Set Up Later.

      If you choose this option, skip to Step 14.

  13. Type the code in the verification field and then click Continue.

  14. Wait a few minutes while your user account is created and El Capitan is configured for you.

    The OS X Finder’s Desktop appears.

And that’s all there is to it. You’re done.

When Mac OS is running slow, it's better to reinstall the system again instead of carefully cleaning up files; if you want to donate Mac hard drive, or give it to family members using Windows system, you can wipe it and format the hard drive to NTFS or FAT32 in Windows disk manager.

Macrorit Data Wiper is able to wipe Mac Hard Drive with HFS plus file system clean, after wiped in data Wiper, the hard drive can be used without worrying about leakage on old data.

Wipe Mac hard drive and reinstall Mac OS

Before wiping Mac hard drive, it's advised to backup important files. Here're the steps to erase everything and reinstall Mac OS X:

  1. Restart Mac;
  2. Press CMD key + R at the same time, and hold them for a while when the gray window shows up options;
  3. Click on 'Disk Utility', and click 'Continue';
  4. Choose the disk listed on the left side, and click 'Erase' Tab;
  5. If you're going to reinstall Mac OS, just leave the settings as default, and click 'Erase' to continue;
  6. After erased, click Reinstall OS X, for example, to continue.

Erase Disk And Reinstall Mac Os

Now we have this OS reinstalled, it runs smooth as it were. Everything on the disk has been wiped, it's a clean Mac now, and it's safe to donate or share it with others.

Wipe Mac Hard Drive in Windows

What if Mac won't boot, CMD+R can't work either? There's another way to wipe Mac hard drive clean and factory setting it in Windows system, not to format or delete volume in Windows Disk Management, but wipe this disk in third party disk manager, Macrorit Data Wiper.

Steps to wipe Mac Hard Drive in Macrorit Data Wiper

  1. Plug in this hard drive, and boot Windows;
  2. Run Macrorit Data Wiper (Click here to download portable edition);
  3. In the main window, the Mac hard drive is loaded into the disk map, we first click 'Entire Drive', and select on overwrite method from the five available security list; click 'Wipe Now';
  4. Confirm and type 'wipe' in the dialog box, and click 'start' to wipe.

Format HFS plus to FAT32 or NTFS

Mac Hard Drive's file system is HFS plus in the recent released OS, which cannot be recognized by Windows, so we need to format this disk after wiped in Data Wiper to make is useful in Windows 10. Since the disk is now clean, no file system, no EFI partition in it, its factory settings, so we need to initialize this disk and create partition on it.

HFS plus is also known as HFS +, HFS Extended, Mac OS Extended, is a file system developed by Apple Inc., not apply to Windows OS.

Steps to format Mac Hard Drive to NTFS or FAT32 in Windows 10:

  1. Download Macrorit Partition Expert install package or Portable package;
  2. Install it and Run, or run it from portable edition zip file without installation;
  3. Right-click on Mac Hard Drive (now it's clean), and select 'Initialize' to continue;
  4. Choose Partitioning scheme from MBR or GPT; and click OK;
  5. Now this disk turns into unallocated space, click on it, and 'Create Volume';
  6. Choose NTFS or FAT32 in file system column, define cluster size, assign drive letter, and give drive label to this volume; and click OK after resize this volume;

In a word, Macrorit Data Wiper is to wipe disk to its original status, factory reset it, you are able to use format it to any file system in any operating system before using.

Comments are closed.